18-bit octal ADC adds picoamp inputs
Picoamp inputs and 128dB CMRR over a 30VP-P common mode range allow the LTC2358-18 to connect to a variety of…
Rail-to-rail op-amps operate on 5.25V supply
Linear Technology’s op amps feature current supply range of between 20µA to 240µA per amplifier.
No-opto flyback boasts +/-1% load regulation
By sampling the reflected isolated output voltage across the third winding on the power transformer, LT8315 requires no opto-isolator for…
Boost DC/DC controller provides up to 97% efficiency
LTC3897’s low 55μA quiescent current in Burst Mode extends battery operating life and minimises power loss at light loads.
Wireless battery management shines at Electronica
Power management devices remain a strong interest item at the biennial tradeshow. Here are some of the interesting power developments…
USB µModule transceiver provides 7500VRMS isolation
The LTM2894 also provides 17.4mm of creepage, a separation distance that allows medical equipment to operate from mains voltages greater…
Two-phase controller boosts automotive battery power
The LTC3871 operates in buck mode from the 48V bus to the 12V bus or in boost mode from 12V…
Temperature measurement IC digitises with 0.1°C conformity
The LTC2986 adds three new operating modes and reduces the number of analogue inputs from 20 channels to 10 channels.
Power module shrinks to share heat sink with processors
Linear's new power module can be mounted on the PCB backside and can share the heat sink with the on-board…
3.5A step-down regulator supports up to 42V input range
Linear Tech’s LT8610AX is capable of synchronous rectification that provides efficiency as high as 95% while Burst Mode operation and…